Hello Networkers,

We have added a new update to our Fortinet FortiGate Next-Generation Firewall Training Video Series to include the following:

• Interface VPN (IPSec VTI) and OSPF Routing: In this video update (21 minutes), you will learn how to configure a Site-to-Site VPN tunnel using a virtual tunnel interface or a VTI .  This can also be called a Interface-based VPN for how this is configured on the FortiGate.  Doing this can allow us to extend our OSPF routing domain within our LAN across this VPN to the other side.  This will be configured using FortiOS version 5.2 (and later).

Click here for more details

If you are an active Ultimate Collection, Cisco Plus Collection, Cisco Collection, Security Collection, or an active Fortinet FortiGate NGFW Series  subscriber you can download the new updates by going to the Fortinet FortiGate NGFW Download Page located at the  Download Center 

If you purchased the “Non-Subscription” for this package you can purchase this update for $5. Please contact us for more details.

Thank you!

RouteHub
Training Program
www.routehub.net

Hello Networkers,

** Note: This has been tested with iPhone 5, 5s, 6, and 6 plus (iOS 8.3+) **

Play as a virtual Network Engineer in this quiz-based application. You will answer questions related to projects for recommended Cisco solutions and technologies. Questions related to Cisco related configuration and monitoring. And questions related to troubleshooting and maintenance. These are practical questions and scenarios brought up in real world environments.

You will start off as a Junior Network Engineer answering entry-level networking questions. Get enough experience points (XP) and you will be promoted to the next level where the questions will get harder as you continue on. How far can you go?

There are 400 total questions, each level consisting of 100 questions. The different levels are:
1 – Junior Network Engineer
2 – Network Engineer
3 – Senior Network Engineer
4 – Network Architect

Compatibility:
This has been tested with iPhone 5, 5s, 6, and 6 plus (iOS 8.3+)

Click here for more details

Thank you!

RouteHub
Training Program
www.routehub.net

Hello Networkers,

We have added a new update to our Cisco Unified CCX Training Video Series to include the following:

• Cisco Finesse (Part 1): In part 1 of this video update (22 minutes) we will cover some of the sections of Cisco Finesse including providing a general overview for what it provides to the CCX environment.  Cisco Finesse is an alternative and replacement for the Cisco Agent Desktop and Cisco Supervisor Desktop applications.  They are used for managing calls in the queue to viewing agent stats in a team.

Click here for more details

If you are an active Ultimate Collection, Cisco Collection, Cisco+ Collection or Cisco Voice Bundle subscriber you can download the new updates by going to the Cisco Unified CCX Download Page located at the  Download Center under Cisco Training

Thank you!

RouteHub
Training Program
www.routehub.net

Hello Networkers,

We completed updates to the Network Design Cookbook and the Cisco Configuration Reference Guide for the following:

Network Design Cookbook v10.1.7:

• Added new hardware choices for Cisco ISR 4000 series, Cisco Catalyst 3560/3850/2960-X/2960-XR, and SG500XG-8F8T
• Updates to Data Center Facilities under General Design
• Updates to Network Virtualization solution and uses-cases
• Errors and Corrections: we also made other general updates, additional images added, to error corrections discovered during editing.

You can get more details: http://www.routehub.net/design

Cisco Configuration Reference Guide v4.0.7

• Completed a big general clean-up to the document
• Updates to Cisco Nexus section for vPC and VDC
• Added Using 802.1X with Microsoft NPS
• Removed legacy technologies related configuration
• Errors and Corrections: we also made other general updates, additional images added, to error corrections discovered during editing.

You can get more details: http://www.routehub.net/config

If you are an active subscriber you can download the updated version of these documents from the Download Center

Thank you!

RouteHub Group, LLC
Training Program
www.routehub.net

Hello Networkers,

We have added a new update to our Cisco Meraki MX Training Series to include the following:

• VLAN and 802.1Q Trunking: In this video update (19 minutes) you will learn how to use VLANs and 802.1Q Trunking on the Meraki MX security appliance. We will configure VLAN trunking between our Meraki MX and our LAN Core switch within the environment. You will also understand how VLANs and Trunking works in a LAN Switching.

Click here for more details

If you are an active Ultimate Collection, Cisco Plus Collection, Cisco Collection, or Security Collection subscriber you can download the new series by going to the  Download Center 

Thank you!

RouteHub
Training Program
sales@routehub.com
www.routehub.net

Hello Networkers,

We have added a new update to our Cisco Unified CCX Training Video Series to include the following:

• Cisco Finesse (Part 2): In part 2 of this video update (16 minutes) we will cover more sections of Cisco Finesse such as using reason codes and wrap-up reasons.  Cisco Finesse is an alternative and replacement for the Cisco Agent Desktop and Cisco Supervisor Desktop applications.  They are used for managing calls in the queue to viewing agent stats in a team.

Click here for more details

If you are an active Ultimate Collection, Cisco Collection, Cisco+ Collection or Cisco Voice Bundle subscriber you can download the new updates by going to the Cisco Unified CCX Download Page located at the  Download Center under Cisco Training

Thank you!

RouteHub
Training Program
www.routehub.net

Hello Networkers,

In this update of the Network Design Cookbook we completed updates to the following solutions/services/sections:

• Updates to Data Center Facilities under General Design
• Updates to Virtual Port Channel (vPC)
• Updates to General Security under General Design
• Updates to Route Pattern definitions under Voice (Unified Communications)
• Errors and Corrections: we also made other general updates, additional images added, to error corrections discovered during editing.

You can get more details at: http://www.routehub.net/design

BTW – we have released a new video series focused on Practical Network Design using the Network Design Cookbook called the Network Design Training Series

RouteHub Group, LLC
Training Program
www.routehub.net

Hello Networkers,

In this new video series you will learn how to deploy the Riverbed Steelhead appliance step-by-step in a simple and practical implementation. This includes topics ranging from discussing the WAN optimization techniques used, initial configuration, optimization rules, before-and-after performance testing, to viewing various data reduction reports. This video series will be exclusive to active Ultimate Collection subscribers and will be available as an individual training package at a later time.

Below are some of the video topics that are available and what topics are already being scheduled to be released soon:

1. Overview and Design
2. Network Infrastructure Overview
3. Installation (using Virtual Appliance)
4. Placing the Steelhead into the Network
5. Initial Configuration

Scheduled Updates Planned:

1. Licensing
2. Time Services
3. Software Upgrades
4. In-Path and Peering Rules
5. WAN Optimization Testing and Verification – Part 1, 2, and 3
6. Flow Statistics and Top Talkers
7. WAN Visibility Modes
8. Transport and Application Streamlining
9. Virtual In-Path

You can get more details at: http://www.routehub.net/riverbed-steelhead

View a sample video from this series here:

If you are an active Ultimate Collection subscriber you can download the new series by going to the  Download Center

RouteHub Group, LLC
Training Program
www.routehub.net

Hello Networkers,

In this new video series you will learn how to deploy the Riverbed Steelhead appliance step-by-step in a simple and practical implementation. This includes topics ranging from discussing the WAN optimization techniques used, initial configuration, optimization rules, before-and-after performance testing, to viewing various data reduction reports. This video series will be exclusive to active Ultimate Collection subscribers and will be available as an individual training package at a later time.

Below are some of the video topics that are available and what topics are already being scheduled to be released soon:

1. Overview and Design
2. Network Infrastructure Overview
3. Installation (using Virtual Appliance)
4. Placing the Steelhead into the Network
5. Initial Configuration

Scheduled Updates Planned:

1. Licensing
2. Time Services
3. Software Upgrades
4. In-Path and Peering Rules
5. WAN Optimization Testing and Verification – Part 1, 2, and 3
6. Flow Statistics and Top Talkers
7. WAN Visibility Modes
8. Transport and Application Streamlining
9. Virtual In-Path

You can get more details at: http://www.routehub.net/riverbed-steelhead

If you are an active Ultimate Collection subscriber you can download the new series by going to the  Download Center

RouteHub Group, LLC
Training Program
www.routehub.net

Hello Networkers,

We have added a new update to our Network Design Training Video Series to include the following:.

• IP Routing Solution (1): a new design workshop has been added for building a general IP routing design. This service design will overlay general IP routing on-top of our network topology. It will utilize OSPF for the internal routing protocol and BGP for external routing with our redundant ISP cloud. We will also determine how our default gateways will be implemented and advertised across our routing domain including which networks we want to apply security protection to. This is the first step before the actual OSPF and BGP design within our topology.

Click here for more details

If you are an active Ultimate Collection, Cisco Plus Collection, or an active Network Design Training Series subscriber you can download the new series by going to the  Download Center

Thank you!

RouteHub
Training Program
www.routehub.net

Hello Networkers,

We have added a new update to our Riverbed Steelhead CX (WAN Optimization) Training Video Series to include the following:

• Licensing, Time Services, & Software Upgrade: In this video update, we are continuing our deployment of the Riverbed Steelhead CX appliance to provide WAN optimization. In these updates you will learn how to install licensing, setup time services, and how to upgrade the RiOS on the appliance as a best practice.

Note: This video series is currently exclusive to active Ultimate Collection subscribers and will be available as an individual training package at a later time.

You can get more details at: http://www.routehub.net/riverbed-steelhead

If you are an active Ultimate Collection subscriber you can download the new series by going to the  Download Center

RouteHub Group, LLC
Training Program
www.routehub.net

Hello Networkers,

We have added a new update to our Palo Alto Networks Video Series to include the following:

• Virtual Wire (Part 1): In this video update (24 minutes) you will learn how to setup the PAN appliance with transparent interfaces or what Palo Alto calls it a Virtual Wire. Its recommended to use this mode if the PAN appliance will not be doing any routing, VLAN switching or using any NAT translations. This includes any VPN tunnels to sites or clients.

Click here for more details

If you are an active Ultimate Collection or Palo Alto Networks subscriber you can download the new updates by going to the Palo Alto Networks Download Page located at the  Download Center 

If you purchased the “Non-Subscription” for this package you can purchase this update for $10. Please contact us for more details.

Thank you!

RouteHub
Training Program
www.routehub.net

Hello Networkers,

We have added a new update to our Riverbed Steelhead CX (WAN Optimization) Training Video Series to include the following:

• In-Path and Peering Rules: In this video update we will be setting up our In-path rules and peering rules on our two Steelhead CX appliances. This will finally get into the WAN optimization of our network and see the performance demands increase.

Note: This update is available to Ultimate Collection subscribers and this series is now available as an individual training package.

You can get more details at: http://www.routehub.net/riverbed-steelhead

If you are an active Ultimate Collection or Riverbed Steelhead CX subscriber you can download the new series by going to the  Download Center

RouteHub Group, LLC
Training Program
www.routehub.net

Hello Networkers,

We completed updates to the Network Design Cookbook and the Cisco Configuration Reference Guide for the following:

Network Design Cookbook v10.1.9:

• Added Cooling Considerations under Data Center Facilities > General Design
• Added IPv6 RH0 and HbH Best Practices under IPv6
• Errors and Corrections: we also made other general updates, additional images added, to error corrections discovered during editing.

You can get more details: http://www.routehub.net/design

Cisco Configuration Reference Guide v4.0.9

• FCoE on Cisco Nexus 5000
• BPDU Guard
• NSF with EIGRP
• Full IPv4 Multicast Configuration with Best Practices
• Updates to LLQ configuration
• Errors and Corrections: we also made other general updates, additional images added, to error corrections discovered during editing.

You can get more details: http://www.routehub.net/config

If you are an active subscriber you can download the updated version of these documents from the Download Center

Thank you!

RouteHub Group, LLC
Training Program
www.routehub.net

Hello Networkers,

We have added a new update to our Riverbed Steelhead CX (WAN Optimization) Training Video Series to include the following:

• WAN Optimization Testing and Verification: In this video update (34 minutes), we will be testing and monitoring WAN optimization based on the configuration we completed. We will be doing multiple tests by accessing files over the WAN initially and then consecutively by our client. We will view and discuss the various reports available for the optimized traffic. We will discuss how to view active connections that are being optimized and what mechanisms were used. And we will look at other relevant stats to ensure that WAN optimization is indeed working.

Note: This update is available to Ultimate Collection subscribers and this series is now available as an individual training package.

You can get more details at: http://www.routehub.net/riverbed-steelhead

If you are an active Ultimate Collection or Riverbed Steelhead CX subscriber you can download the new series by going to the  Download Center

RouteHub Group, LLC
Training Program
www.routehub.net

Hello Networkers,

We have added a new update to our Palo Alto Networks Video Series to include the following:

• Virtual Wire (Part 2): In part two of this video update (10 minutes) we will add a customer network to our hosted network. In this video lab we setup the PAN appliance with transparent interfaces or what Palo Alto calls it a Virtual Wire. We also setup BGP between our ISP and Core switch through the transparent interfaces with the necessary security policies.

Click here for more details

If you are an active Ultimate Collection or Palo Alto Networks subscriber you can download the new updates by going to the Palo Alto Networks Download Page located at the  Download Center 

If you purchased the “Non-Subscription” for this package you can purchase this update for $10. Please contact us for more details.

Thank you!

RouteHub
Training Program
www.routehub.net

Hello Networkers,

We have added a new update to our Riverbed Steelhead CX (WAN Optimization) Training Video Series to include the following:

• Flow Statistics and Top Talkers: In this video update, we will show you how to enable flow stats and top-talkers for the optimized connections through a Steelhead appliance. This can provide a lot of help in regards to viewing which connections over the WAN typically consume the most bandwidth. And in return being optimized efficiently.

You can get more details at: http://www.routehub.net/riverbed-steelhead

If you are an active Ultimate Collection or Riverbed Steelhead CX subscriber you can download the new series by going to the  Download Center

RouteHub Group, LLC
Training Program
www.routehub.net

Hello Networkers,

In this update of the Network Design Cookbook we completed updates to the following solutions/services/sections:

• Updates to LISP service design
• Added Power Design Considerations under Data Center Facilities > General Design
• Errors and Corrections: we also made other general updates, additional images added, to error corrections discovered during editing.

You can get more details at: http://www.routehub.net/design

BTW – we have released a new video series focused on Practical Network Design using the Network Design Cookbook called the Network Design Training Series

RouteHub Group, LLC
Training Program
www.routehub.net

Hello Networkers,

We have added a new update to our Cisco Meraki MX Training Series to include the following:

• DHCP: In this video update we will enable DHCP services for one of our networks (Guest network). We will show you how to setup this feature and how to monitor it on the Meraki MX security appliance. This is a continuation from our VLAN and trunking configuration reflected in the last video update.

Click here for more details

If you are an active Ultimate Collection, Cisco Plus Collection, Cisco Collection, or Security Collection subscriber you can download the new series by going to the  Download Center 

Thank you!

RouteHub
Training Program
sales@routehub.com
www.routehub.net

Hello Networkers,

We have added a new update to our Network Design Training Video Series to include the following:.

• LAN Switching Services (VTP, VLAN): a new design workshop has been added for building LAN switching services (part 1; 17 minutes) on top of our network topology.  We will do the service design for VTP (VLAN Trunking Protocol) in regards to the dangers and how VTP should be implemented on the network.  We will also do the service design for VLANs including SVI (L3 VLANs) based on best practices outlined in the Network Design Cookbook.  The next update will focus on 802.1Q trunking and STP service designs.

Click here for more details

If you are an active Ultimate Collection, Cisco Plus Collection, or an active Network Design Training Series subscriber you can download the new series by going to the  Download Center

Thank you!

RouteHub
Training Program
www.routehub.net